/themes/plugins/fancybox/css/fancybox.css
Kamión Ťahač Náves Úžitkové vozidlo Kamión korba Kamión valník Kamión dodávka Kamión chladiarenské vozidlo Úžitkové vozidlo Sklápacie vozidlo Autobus Autokar
Aukcie Prenájom Riešenia a partneri SK Jazyky
Hlavná ponuka
Hlavná ponuka
Riešenia a partneri
Kúpiť
Predať
Užitočné odkazy
O Via Mobilis
Dobrý deň, prihláste sa
Stats
 Späť na vyhľadávanie
Kamión Renault MTS DINO 3

Kamión vysávač Renault MTS DINO 3 6 × 4 Nafta ojazdený

  • 183 600 km
  • 2008.01.01
  • Renault
  • 26-021 Niwy
Kamión Vysávač
Hlavné informácie
Ref. webu: 9517304
Karoséria Vysávač
Značka Renault
Model MTS DINO 3
Stav Ojazdené
Dátum prvej evidencie vozidla 2008.01.01
Krajina POĽSKO
Výrobca Renault
Stav stroja
EnergiaNafta
Prevodovka
Upresnenie prevodovkyBoîte automatique
PrevodovkaManuálna prevodovka
Charakteristické znaky Renault MTS DINO 3
Kilometráž183 600 km
Pneumatiky
Odpruženie/nápravy
Nápravy 6 × 4
Poznámky
Localisation :
  •  Poland Niwy15623 km to "Australia/Sydney"
Condition :
  •  used
More details :
  •  deep blue


RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances

Year of production of the body 2008
Year of manufacture of the car 2007
Mileage 183600 km


MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides.

Air draft: 36,000 m³/h
Negative pressure generated: 34,000 Pa
The blower is made of two groups of centrifugal fans with a working capacity of 220kW
Tank container 8 m³
Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter
Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar
Radio control
Ability to suck material from a depth of 20 m and a distance of 100 m.
100L water tank

It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls.
It is applicable in the following areas:
cleaning tanks and silos from accumulated medium,
cleaning tanks, settling tanks from sludge and sediments,
cleaning of filtration chambers, pumping stations, from accumulated sludge
cleaning open and closed surfaces, e.g. channels, boilers, silos,
industrial equipment and machinery of filtration chambers and separators

The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations.
Below are more examples of suction excavator applications:
- removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc.
- disposal of spent chemical catalysts
- removal of accumulated medium from tanks and silos
- cleaning tanks, settling tanks from sludge and sediments
- cleaning of filtration chambers, pumping stations, from accumulated sludge
- cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment.
- removal of railway crushed stone
- excavations in hard-to-reach places
- excavations in places where we have a problem with high density of all installations and the fear of their damage

Suction excavators are able to significantly reduce the time required for removal
all kinds of materials, located in places where it is not possible
the use of other mechanical devices.

For the search engine
replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals,

CAR IN EXCELLENT TECHNICAL CONDITION!
IT IS VISUALLY STUNNING!
IN PERFECT CONDITION!
100% ACCIDENT-FREE!

POSSIBILITY OF CREDIT OR LEASING
- we arrange credit and leasing formalities
- simplified procedures 0% of the first payment
- and newly opened companies
-as well as customers entered in KRD and BIG

MORE INFORMATION AT NO.

show contacts (ENG.RUS.POL) WhatsApp and Viber

ATTENTION.
This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements
Zobraziť všetko
Poznámky
Localisation :
  •  Poland Niwy15623 km to "Australia/Sydney"
Condition :
  •  used
More details :
  •  deep blue


RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances

Year of production of the body 2008
Year of manufacture of the car 2007
Mileage 183600 km


MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides.

Air draft: 36,000 m³/h
Negative pressure generated: 34,000 Pa
The blower is made of two groups of centrifugal fans with a working capacity of 220kW
Tank container 8 m³
Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter
Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar
Radio control
Ability to suck material from a depth of 20 m and a distance of 100 m.
100L water tank

It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls.
It is applicable in the following areas:
cleaning tanks and silos from accumulated medium,
cleaning tanks, settling tanks from sludge and sediments,
cleaning of filtration chambers, pumping stations, from accumulated sludge
cleaning open and closed surfaces, e.g. channels, boilers, silos,
industrial equipment and machinery of filtration chambers and separators

The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations.
Below are more examples of suction excavator applications:
- removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc.
- disposal of spent chemical catalysts
- removal of accumulated medium from tanks and silos
- cleaning tanks, settling tanks from sludge and sediments
- cleaning of filtration chambers, pumping stations, from accumulated sludge
- cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment.
- removal of railway crushed stone
- excavations in hard-to-reach places
- excavations in places where we have a problem with high density of all installations and the fear of their damage

Suction excavators are able to significantly reduce the time required for removal
all kinds of materials, located in places where it is not possible
the use of other mechanical devices.

For the search engine
replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals,

CAR IN EXCELLENT TECHNICAL CONDITION!
IT IS VISUALLY STUNNING!
IN PERFECT CONDITION!
100% ACCIDENT-FREE!

POSSIBILITY OF CREDIT OR LEASING
- we arrange credit and leasing formalities
- simplified procedures 0% of the first payment
- and newly opened companies
-as well as customers entered in KRD and BIG

MORE INFORMATION AT NO.

show contacts (ENG.RUS.POL) WhatsApp and Viber

ATTENTION.
This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements
História vozidla
Predajná cena
63 000 EUR bez DPH
Kamión Vysávač
Hlavné informácie
Ref. webu: 9517304
Karoséria Vysávač
Značka Renault
Model MTS DINO 3
Stav Ojazdené
Dátum prvej evidencie vozidla 2008.01.01
Krajina POĽSKO
Výrobca Renault
Stav stroja
EnergiaNafta
Prevodovka
Upresnenie prevodovkyBoîte automatique
PrevodovkaManuálna prevodovka
Charakteristické znaky Renault MTS DINO 3
Kilometráž183 600 km
Pneumatiky
Odpruženie/nápravy
Nápravy 6 × 4
Poznámky
Localisation :
  •  Poland Niwy15623 km to "Australia/Sydney"
Condition :
  •  used
More details :
  •  deep blue


RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances

Year of production of the body 2008
Year of manufacture of the car 2007
Mileage 183600 km


MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides.

Air draft: 36,000 m³/h
Negative pressure generated: 34,000 Pa
The blower is made of two groups of centrifugal fans with a working capacity of 220kW
Tank container 8 m³
Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter
Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar
Radio control
Ability to suck material from a depth of 20 m and a distance of 100 m.
100L water tank

It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls.
It is applicable in the following areas:
cleaning tanks and silos from accumulated medium,
cleaning tanks, settling tanks from sludge and sediments,
cleaning of filtration chambers, pumping stations, from accumulated sludge
cleaning open and closed surfaces, e.g. channels, boilers, silos,
industrial equipment and machinery of filtration chambers and separators

The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations.
Below are more examples of suction excavator applications:
- removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc.
- disposal of spent chemical catalysts
- removal of accumulated medium from tanks and silos
- cleaning tanks, settling tanks from sludge and sediments
- cleaning of filtration chambers, pumping stations, from accumulated sludge
- cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment.
- removal of railway crushed stone
- excavations in hard-to-reach places
- excavations in places where we have a problem with high density of all installations and the fear of their damage

Suction excavators are able to significantly reduce the time required for removal
all kinds of materials, located in places where it is not possible
the use of other mechanical devices.

For the search engine
replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals,

CAR IN EXCELLENT TECHNICAL CONDITION!
IT IS VISUALLY STUNNING!
IN PERFECT CONDITION!
100% ACCIDENT-FREE!

POSSIBILITY OF CREDIT OR LEASING
- we arrange credit and leasing formalities
- simplified procedures 0% of the first payment
- and newly opened companies
-as well as customers entered in KRD and BIG

MORE INFORMATION AT NO.

show contacts (ENG.RUS.POL) WhatsApp and Viber

ATTENTION.
This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements
Zobraziť všetko
Poznámky
Localisation :
  •  Poland Niwy15623 km to "Australia/Sydney"
Condition :
  •  used
More details :
  •  deep blue


RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances

Year of production of the body 2008
Year of manufacture of the car 2007
Mileage 183600 km


MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides.

Air draft: 36,000 m³/h
Negative pressure generated: 34,000 Pa
The blower is made of two groups of centrifugal fans with a working capacity of 220kW
Tank container 8 m³
Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter
Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar
Radio control
Ability to suck material from a depth of 20 m and a distance of 100 m.
100L water tank

It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls.
It is applicable in the following areas:
cleaning tanks and silos from accumulated medium,
cleaning tanks, settling tanks from sludge and sediments,
cleaning of filtration chambers, pumping stations, from accumulated sludge
cleaning open and closed surfaces, e.g. channels, boilers, silos,
industrial equipment and machinery of filtration chambers and separators

The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations.
Below are more examples of suction excavator applications:
- removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc.
- disposal of spent chemical catalysts
- removal of accumulated medium from tanks and silos
- cleaning tanks, settling tanks from sludge and sediments
- cleaning of filtration chambers, pumping stations, from accumulated sludge
- cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment.
- removal of railway crushed stone
- excavations in hard-to-reach places
- excavations in places where we have a problem with high density of all installations and the fear of their damage

Suction excavators are able to significantly reduce the time required for removal
all kinds of materials, located in places where it is not possible
the use of other mechanical devices.

For the search engine
replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals,

CAR IN EXCELLENT TECHNICAL CONDITION!
IT IS VISUALLY STUNNING!
IN PERFECT CONDITION!
100% ACCIDENT-FREE!

POSSIBILITY OF CREDIT OR LEASING
- we arrange credit and leasing formalities
- simplified procedures 0% of the first payment
- and newly opened companies
-as well as customers entered in KRD and BIG

MORE INFORMATION AT NO.

show contacts (ENG.RUS.POL) WhatsApp and Viber

ATTENTION.
This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements
História vozidla
Predajná cena
63 000 EUR bez DPH

TRUCK POLAND

26-021 Niwy

POLOGNE


tag-iconPočet rokov na webe Europa-Kamiony.com: 15

Pán FURMANEK Wiktor
Anglais
+48.697.07.06.70

Via Mobilis sa zaväzuje dodržiavať základné hodnoty uvedené v predpisoch o ochrane osobných údajov.

Na ochranu tohto webu používame overovanie reCAPTCHA. Uplatňujeme zásady ochrany osobných údajov a podmienky používania spoločnosti Google.

  Bezpečnostné upozornenia  
Nahlásiť inzerát
Podobné inzeráty
24
Kamión vysávač Mercedes

Kamión vysávač Mercedes 2024 Pojazd dwudrogowy MERCEDES BENZ 2024 Z URZĄDZENIEM

59 958 EUR bez DPH
1999
35
Kamión vysávač Renault

Kamión vysávač Renault DR RIVARD HYDROCURE

49 000 EUR bez DPH
4 x 2 2003
33
Kamión vysávač Bucher Schoerling

Kamión vysávač Bucher Schoerling JOHNSTON VOLVO FL 15.250

109 000 EUR bez DPH
250 hp 2020
24
Kamión vysávač MAN
Nové
Kamión vysávač MAN
Kamión vysávač MAN

Kamión vysávač MAN TGA 35.440

59 700 EUR bez DPH
35t 8 × 4 Euro 4 440 hp 2008
MAN TGA 35.440 8×4 / SB-106 vacuum excavator 114 thousand km 5700 MTH Year 2008 Technical data GVM 35000 kg 440 HP Mechanical suspension SB-106...
Strana 1 z 4

Vrchná časť stránky